Apply the brake lightly and with great
care on slippery surfaces to avoid
skidding.
WARNING
22
Do not operate the engine stop switch to
be in the
position while driving at
one’s pleasure.
HORN SWITCH
Press the switch to operate the horn.
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
Position : Flash the left turn
signal lamp and turn
signal indicator lamp.
Position : Flash the right turn
signal lamp and turn
signal indicator lamp.
ENGINE STOP SWITCH
Position :
Using when dangerous
condition of falling down during
drive and others or engine stop
suddenly. The ignition circuit is off.
The engine cannot start or run.
Position : Using when need
operation of engine as drive and
others. The ignition circuit is on
and the engine can run.
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the
OFF
position after
completing the turn or lane change.
CAUTION
RIGHT HANDLE SWITCHES
FRONT BRAKE LEVER
The front brake is applied by squeezing
the brake lever gently toward the throttle-
grip.
Front brake be anxious about motorcycle
falling down when braking suddenly as disk
brake system. The brake lamp will come on
when the lever is squeezed.
WARNING
To Next Page
Loading...
