Hypercom T7 series - Chapter 3 T7 PRA Troubleshooting; Cellular Configuration and Testing

CHAPTER 3
846%8VSYFPIWLSSXMRK
'IPP'S RJMKYVEXMSRMRXLI 7]W XIQ 7SJX[EVI
Step-by-Step
To configure a T7PRA:
Step Action Terminal display
1 Press the key sequence: Function 1, 1, Enter. &(//&21),*
&(//7(67
2 Press 0 to begin configuring the terminal. &(//&21),*
&(//7(67
This display shows the cellular terminal current
configuration.
3+21(
(61
3 Type the cell phone number and press Enter. &(//&21)
&(//3+21(180%(5"
4 Type the system ID and press Enter. &(//&21)
6<67(0,'"
5 Type the number corresponding to the desired
system and press Enter.
6<67(0%$21/<
1250$/+20("