Hypercom T7 series - Initializing a Terminal for a Parameter Download

Equipment Information
940114-020 Hypercom Point-of-Sale 1-15
-RMXMEPM^MRKE8IVQMREPJSVE4EVEQIXIV(S[RPSEH
The terminal dials to receive an initialization (the INIT. telephone number located in the Function
2 parameters) for the unique terminal ID, also known as the terminal profile.
One of the following screens appear, depending on what previous action was taken at the
terminal’s Application level.
7GVIIR 
2 Press Enter/Yes.
N
OTE: A Yes confirms that your configuration
parameters in function 2 are correct.
352*5$0/2$'
&255(&7" <(62512
The terminal checks the phone line for a proper
connection.
352*5$0/2$'
&+(&.,1*/,1(
The terminal detects a proper phone line
connection and is waiting to detect a dial tone.
352*5$0/2$'
:$,7,1*)25',$/721(
The terminal detects a dial tone and is waiting to
dial out.
352*5$0/2$'
',$/,1*12:
The terminal has dialed out and is waiting for an
answer from the Host.
352*5$0/$'
:$,7,1*)25$16:(5
The terminal has made a connection and is
communicating with the Host.
352*5$0/2$'
75$,1,1*02'(0
The terminal is downloading the software
application shell from the Host. Approximate time
is 25 minues.
352*5$0/2$'
/2$',1*0(0;;;;
The terminal has successfully downloaded the
software application shell from the Host.
352*/2$'
352*/2$'*22'
3 After receiving the software application shell, you
will need to initialize the terminal in order for the
Host to download the merchant’s profile. Refer to
“Initializing a Terminal for a Parameter Download”
on page 1-15.
3/($6(,1,7,$/,=(
Step Action Terminal display
Previous action Terminal display
After receiving the software application shell,
you need to initialize the teminal to download
the merchant profile from the Host.
3/($6(,1,7,$/,=(