Hypercom T7 series - Page 33

Chapter 1
1-16 T7 Series Troubleshooting Manual 940114-020
7GVIIR 
Step-by-Step
To initialize the terminal for a parameter download.
Previous action Terminal display
If you have software and you are adding a card
type or printer, the terminal displays the
following message.
N
OTE: Do not initialize the terminal over an open
batch when adding a card type or
acquirer.
'$7( 7,0(
6:,3(&86720(5&$5'
Step Action Terminal display
1 Press Initialize, Enter.
N
OTE: A Yes confirms that your configuration
parameters in Function 2 are correct.
,1,7,$/,=(
&255(&7" <(62512
The terminal checks the phone line for a proper
connection.
,1,7,$/,=(
&+(&.,1*/,1(
The terminal detects a proper phone line
connection and is waiting to detect a dial tone.
,1,7,$/,=(
:$,7,1*)25',$/721(
The terminal detects a dial tone and is waiting to
dial out.
,1,7,$/,=(
',$/,1*12:
The terminal has dialed out and is waiting for an
answer from the Host.
,1,7,$/,=(
:$,7,1*)25$16:(5
The terminal has made a connection and is
communicating with the Host.
,1,7,$/,=(
75$,1,1*02'(0
The terminal has successfully initialized with the
merchant’s specific profile.
75$16$&7,21&203/(7('
2 Press Cancel to return to the idle prompt.
N
OTE: The terminal display returns to the Idle
prompt whether Cancel is pressed or not.
'$7( 7,0(
6:,3(&86720(5&$5'