D. TOP-SPEED LIMITER
• Press the ‘N’ button to keep your vehicle’s stock top-speed
limiter and skip to the next option.
• If you have installed factory-approved high-performance
tires, press the ‘Y’ button to change your vehicle’s top-speed
limiter to match the speed rating of those tires. The speed
rating or speed symbol will be found on the sidewall of your
tires. Here are the corresponding symbols and maximum
top-speed limits that can be programmed into your vehicle:
E. TIRE SIZE
NOTE: If you select ‘Y’, you will automatically be asked to
enter a gear ratio AFTER you have selected your tire
height. You will not be allowed to enter ‘N’ for stock
gear ratio. If you have not changed the tire height,
you should select ‘N’ for tire height.
• Press ‘N’ if the original size tires are being used.
• Press ‘Y’ if you have installed tires with an overall height
that is different than the original factory tires. This feature will
recalibrate your speedometer/odometer readings and part-throttle
shifting for automatic transmissions for the new tire height.
The s and t arrows will allow adjustments of 1/4” increments
between 24”-30”. Press the ‘Y’ button to lock in the desired
value. At any time you may press ‘N’ to allow you to either
try again or skip to the next option.
10
PRESS Y TO ADJUST TOP SPEED LIMIT TO MATCH SPEED RATING OF HIGH-PERFORMANCE TIRES
PRESS N TO KEEP STOCK TOP SPEED LIMIT
USE UP/DOWN ARROWS TO ADJUST TOP SPEED LIMIT, THEN PRESS Y TO SELECT OR N TO EXIT.
_ – –_ _ _ MPH
S - 110 MPH
T - 116 MPH
U - 122 MPH
H - 128 MPH
V - 147 MPH
W - 166 MPH
Y - 184 MPH
ZR - 255 MPH
PRESS Y IF TIRE HEIGHT HAS BEEN CHANGED
PRESS N TO KEEP STOCK TIRE HEIGHT
USE UP/DOWN ARROWS TO CHOOSE CORRECT TIRE HEIGHT, THEN PRESS Y TO SELECT OR N TO EXIT.
_ _._ _”
To Next Page
Loading...
