To Next PageTo Next Page
Need help?Do you have a question about the Hypertherm powermax900 and is the answer not in the manual?
General| Maximum Open Circuit Voltage (OCV) | 300 VDC |
|---|---|
| Input Power (CSA 3-PH) | 30-75 kW |
| Input Power (CE 3-PH) | 30-75 kW |
| Input Power (CSA 1-PH) | 25 kW |
| Input Power (CE 1-PH) | 25 kW |
| Output Voltage | 130 VDC |
| Duty Cycle @ 40° C | 100% |
| Duty Cycle | 100% @ 70 A |
| Max Cutting Thickness | 25 mm |
| Cutting Capacity (quality) | 20 mm (0.75 in) |
| Gas Supply | Air or Nitrogen |
| Gas Type | Air or Nitrogen |
| Torch Lead Length | 7.6 m (25') |
