What to do if my Hypontech HPT Inverter displays a DC component of the current exceeds permissible range error?
Disconnect the inverter from the utility grid and the PV array, and reconnect it after the LED turns off. If the fault persists, further assistance is needed.
What should I do if my Hypontech HPT reports that N and PE voltage exceeds permitted range?
Check if the inverter is securely grounded.
Details the physical mounting process and the correct installation of the protective earth (PE) cable.
Covers essential safety precautions and the procedure for AC wiring assembly and connection.
Details DC wire assembly, connection, and residual current protection for inverter setup.
Provides a comprehensive checklist of safety checks to perform before powering on the inverter.
Lists common error codes, fault names, descriptions, and recommended corrective actions.
To Next Page
General