27
Problem
May Be Caused By What To Do
The back of the oven
sparks after the wiring has
been installed.
●
Incorrect electrical wiring
installation.
●
Contact the electrician that
installed the oven and ask
them to check the wiring,
please reference the wiring
diagram.
The oven continues to heat
passed the temperature
selected on my oven knob.
●
Defective thermometer
●
Loose wiring connection
between the thermometer
and valve.
●
Incorrect electrical wiring
installation.
●
Improper usage.
●
Contact the electrician that
installed the oven and ask
them to check the wiring,
please reference the wiring
diagram.
●
Check for loose wiring.
●
Please read the knob
configuration specifications
section of this manual to
ensure you are properly
using the oven.
The pro-style temperature
gauge is not accurate.
●
Normal Occurrence
●
The gauge does not always
give an accurate reading,
this is normal and is related
to the convection fan
blower. The fan will
sometimes give the
temperature gauge a false
reading because it may cool
it temporarily. Please
disregard this 5-10%
discrepancy, it is a normal
occurrence in nearly all
convection ovens.
Can the gas baking oven
work at the same time as
the electrical baking oven.
My oven seems to be
getting very hot when I
utilize both features.
●
This is not allowed, it will
overheat the circuit
boards in the oven and
crack the oven door
glass.
●
Do not attempt this
procedure or all warranties
are void.
HTDF366 – Affluent Series Range Troubleshooting
www.hypotheory.com
To Next Page
Loading...