General
This manual provides general information on the
electrical system K007, J019, and A238 lift trucks
and provides a link between the electrical
schematic and the actual location of the electrical
components on the lift truck.
The description and replacement procedures for the
electrical system components are located in the
relevant manual for the component.
An example would be a transmission solenoid
which would be located in Transmission
1300SRM1456.
The actual electrical schematic drawings are
located in Diagrams SRM.
Electrical Schematic and System Description
ELECTRICAL SCHEMATIC
The electrical schematic is laid out over several pa-
ges/sheets in Diagrams SRM. Each page shows the
electrical connection between the components, con-
nectors, and wires.
The layout of the schematic is function driven,
which means that each sheet represents one partic-
ular function or area as indicated by the title of the
sheet. Table 1 and Table 2 shows the index of the
different sheets.
2200 SRM 1592 General
1
To Next Page
