EasyManua.ls Logo

Hytera AP51 Series - Basic Operations; Turning On or Off the Radio; Adjusting the Volume; Selecting a Zone

Hytera AP51 Series
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
4. Basic Operations
4.1 Turning On or Off the Radio
To turn on or off the radio, press and hold the
On-Off
key.
4.2 Adjusting the Volume
Press the
Volume Up
key to increase the volume, or
Volume Down
key to decrease the volume.
4.3 Selecting a Zone
A zone is a group of channels within the same operational area. The radio supports 2 zones, each of which
consists of up to 16 channels.
To select a zone, press the preprogrammed
Zone Up
or
Zone Down
key.
4.4 Selecting a Channel
The radio receives and transmits voice and data on the selected channel. Before selecting a channel, make sure
that the current zone contains the channel.
Rotate the
Channel Selector
knob to select a channel.
4.5 Call on Analog Channel (Without Signaling)
When you are speaking during a call, keep the microphone about 2.5 cm to 5 cm away from your mouth. This
ensures optimal voice quality on the receiving radio.
On an analog channel without signaling, you can initiate a call to all the other users on the channel.
Rotate the
Channel Selector
knob to select the analog channel, and then press and hold the
PTT
key.

Related product manuals