15
5. Status Indications
5.1 LCD Icons
Icon Radio Status
The radio detects no signal.
The number of bars indicates the signal strength.
The radio operates in low power mode.
The radio operates in high power mode.
An accessory is connected.
The GPS feature is enabled, and valid positioning data has been received.
The GPS feature is enabled, but no valid positioning data has been received.
The BT feature is enabled.
A BT device is connected.
The Mode Automatic Switch feature is enabled.
The radio is in emergency mode.
The radio stays on a site.
The radio is roaming.
The Scrambler or Encrypt feature is enabled.
The Over the Air Encrypt feature is enabled.
The radio is scanning.
The radio stays on an active channel.
The radio stays on Priority Channel 1.
The radio stays on Priority Channel 2.
The radio has switched to the mixed channel.
The TF card is abnormal.
To Next Page
Loading...
Need help?
General
