35
8.1.2.9 Any Call (Trunking Only)
The Any Call feature allows the radio to initiate a call to a contact whose ID is not in the contact list.
Go to Call Settings > Any Call, and then press the OK/Menu key to enable or disable Private ID.
With Private ID enabled, you can call any private contacts.
With Private ID disabled, you can call only the private contacts in the contact list or emergency
contact.
Go to Call Settings > Any Call, and then press the OK/Menu key to enable or disable Group ID.
With Group ID enabled, you can call any group contacts except that of the background group.
With Group ID disabled, you can call only the group contacts in the contact list, dynamic group, or
emergency contact.
Go to Call Settings > Any Call, and then press the OK/Menu key to enable or disable Phone.
With Phone enabled, you can call any PABX/PSTN contacts.
With Phone disabled, you can call only the PABX/PSTN contacts in the contact list or emergency
contact.
8.1.2.10 Call Divert (Trunking Only)
When the radio malfunctions or powers off, the Call Divert feature allows the radio to divert calls to a private or
PABX/PSTN contact to ensure communications.
Go to Call Settings > Call Divert.
Go to Divert ID, and then enter the ID.
Go to On/Off, and then press the OK/Menu key to enable or disable the feature.
8.1.3 Security
8.1.3.1 Power-on Password
This feature allows you to set the power-on password of the radio.
Go to Security > Power on Password.
Go to Password Set, enter the initial password (88888888 by default), and then enter the new password.
Go to On/Off, and then press the OK/Menu key to enable or disable the feature.