42
8.3.3.3 Noise Suppression
The Noise Suppression feature allows the radio to automatically eliminate ambient noise when receiving or
transmitting voice. This feature enhances the voice clarity, while also decreases the volume.
With this feature enabled by your dealer, go to Menu > Profiles > Settings > Audio Set > Noise Suppression, and
then press the OK/Menu key to enable the feature.
8.4 Scan
8.4.1 Conventional Mode
In conventional mode, the Scan feature allows you to listen to activities on other channels, keeping track of your
team members.
8.4.1.1 Enabling the Scan Feature
Go to Menu > Scan > Scan On/Off, and then press the OK/Menu key.
Press the preprogrammed Scan key.
With this feature enabled, the radio scans according to the scan list preset for the current channel. During the
scanning, the LCD displays , and the LED indicator flashes orange slowly.
When detecting activities on a channel, the radio stays on the channel and the LED indicator glows green. If the
radio stays on Priority Channel 1 or Priority Channel 2, the LCD displays or . If the radio stays on a non-
priority channel, the LCD displays .
If you do not want to hear activities on the channel, press the preprogrammed Nuisance Temporary Delete
key to remove the channel from the scan list temporarily.
8.4.1.2 Setting the Scan List
The scan list is a list of up to 32 analog and digital channels that the radio scans.
Go to Menu > Scan, select the scan list, and then do one of the following:
Select Add CH, and then press the OK/Menu key to add a new channel to the list.
Select Set Default, and then press the OK/Menu key to set the list as the default scan list for the current
channel.
Select View Record, and then press the OK/Menu key to view or manage all channels on the current list.
To Next Page
Loading...
Need help?
General
