Hytera PD56X R5.6 - Basic Operations; Powering On;Off; Adjusting the Volume; Selecting a Zone

7
Basic Operations
Selecting a Zone Selecting a Channel
“click ”
ON
- +
“click ”
OFF
Powering On/Off
Adjusting the Volume
Selecting a Zone
A zone is a group of channels exhibiting the same property, which is
programmed by your dealer and can facilitate convenient management
over the channel. The radio support 32 zones, and each zone consists of
up to 16 channels.
●
Via the menu: Go to “Menu -> Zone”, press the
Up
or
Down
key
to select an appropriate zone, and then press the OK/Menu key to
conrm it.
●
Via Programmable Keys: You can toggle to the appropriate zone by
pressing the programmed
Zone Up
or
Zone Down
key preset by your
dealer.
Selecting a Channel
After the radio is powered on, you can rotate the Channel Selector Knob
to select an appropriate channel. You can also switch to the designated
channel directly by pressing the programmed Preset Channel key preset
by your dealer.
If the Channel Notify feature is enabled by your dealer or by you via the
menu “Settings -> Radio Settings -> Tones”, the radio will announce the
channel number upon channel switching.