12
Feature Type Detailed Feature
Analog Features
●
Access management: Time-out-Timer (TOT),
Transmission Management, Monitor, Squelch
Off and Adjust Squelch Level
●
Call on Analog Channel (No Signaling)
●
Security: Scrambler
●
Signaling: HDC1200, 5-Tone and 2-Tone
Follow the instructions below when using the VOX
feature:
●
You can only enable or disable the VOX feature for one
channel instead of all of the channels at a time.
●
When using the VOX feature, holding down the internal
or external PTT key will disable the VOX feature for
the current channel. In such case, you can enable the
VOX feature by switching the channel, pressing the
programmed VOX key or restarting the radio.
●
The VOX feature settings will remain the unchanged
when the radio is powering on and off.
●
The VOX Gain Level includes Internal MIC VOX Gain
Level and External MIC VOX Gain Level, which can be
configured by your dealer or via the menu.
●
The VOX MIC Selection can be set to Only External and
External First, which is set to Only External by default
Feature Description
and can be configured by your dealer.
●
To use the VOX feature with an external microphone, make
sure the PTT/VOX switch is switched to “VOX” before
the radio is powered on and the VOX feature is enabled.
●
No matter the VOX feature is enabled or disabled after
the radio is powered on, if the PTT/VOX switch is switched
to “PTT”, you can talk by holding down the internal or
external PTT key. In such case, switching the PTT/VOX
switch to “VOX” will keep the radio transmitting. To
make the radio function properly, switch the PTT/VOX
switch to “PTT” or restart the radio.
Caution
To Next Page
Loading...
