Hytera PD78XG User Manual

LED Indicator Radio Status
during a call. During the call hang time,
you can press and hold the PTT key and
speak.
Call Services
When you are speaking during a call, keep the
microphone about 2.5 to 5 cm away from your mouth.
This ensures optimal voice quality on the receiving radio.
In trunking mode, if the radio is not registered or
attached, or an empty group is selected, you cannot
initiate a call.
Group Call
A group call is a call from an individual user in a group to
all other members in the group.
Initiating a Group Call
When you initiate a group call, the radio displays .
Conventional Mode
l To initiate a group call to the preset contact on the
current channel, press and hold the PTT key.
l To initiate a group call through the contact list, do as
follows:
1. Press the preprogrammed Contact List or
Favorite Contact List key, or go to Menu >
Contact > Contact List or Favorite Contact.
2. Select the group contact.
3. Press and hold the PTT key.
l To initiate a group call through the keypad, do as
follows:
1. Go to Menu > Contact > Manual Dial, or go to
Menu > Settings > Radio Set > Keypad Mode,
and then select Enable.
2. On the home screen, press
to switch the
input mode to Group ID.
3. Enter the group ID.
4. Press and hold the PTT key.
Trunking Mode
l To initiate a group call to the standby group contact,
press and hold the PTT key.
l To initiate a group call through the contact list, do as
follow:
1. Enter the contact list in one of the following
ways:
» Press the preprogrammed Favorite Contact
List key.
» Go to Menu > Contact > Favorite Contact.
» Press the preprogrammed Current Subgroup
Contact key.
» Press the Back/Subgroup key.
» Go to Menu > Subgroup.
2. Select the group or subgroup contact.
3. Press or the PTT key.
l To initiate a group call through the call log, do as
follows:
1. Enter the call log in one of the following ways:
» Go to Menu > Call Logs > Outgoing or
Incoming > Outgoing List or Incoming List.
» If is programmed as the Redial Call Log
key by your dealer, press on the home
screen.
» If is programmed as the BackDial Call
Log key by your dealer, press on the home
screen.
2. Select the group contact.
3. Press or the PTT key.
l To initiate a group call through the keypad, do as
follows:
1. Go to Menu > Settings > Radio Set > Keypad
Mode, and then select Enable.
2. On the home screen, enter the group ID.
3. Press , , or the PTT key.
Keypad mode is enabled by your dealer. To input a
number complying with the dialling rules, consult
your dealer for more details.
11

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English