Hytera PD78XG User Manual

Keypad mode is enabled by your dealer. To
input a number complying with the dialling
rules, consult your dealer for more details.
l To initiate an all call through the call log, do as
follows:
1. If is programmed as the Redial Call Log
key by your dealer, press on the home
screen.
2. Select the all call log.
3. Press or the PTT key.
Receiving an All Call
When receiving an all call, the radio displays .
You can listen to an incoming all call without any
operation.
Ending an All Call
In conventional mode and trunking mode, an all call ends
when the calling party releases the PTT key.
In trunking mode, an all call also ends in any of the
following cases:
l The calling party ends the call.
l The call duration exceeds the preset time.
l The BS signal is lost.
l The calling party selects an empty group with the
Group Selector knob.
In trunking mode, the radio user of the PD78X
enhanced version cannot end the call by selecting an
empty group.
Broadcast Call (Trunking Only)
A broadcast call is a special group call during which only
the calling party can speak and be heard by pressing and
holding the PTT key.
The Broadcast Call feature is enabled by your
dealer.
Initiating a Broadcast Call
When you initiate a broadcast call, the radio displays .
l To initiate a broadcast call through the contact list, do
as follows:
1. Enter the contact list in one of the following
ways:
» Press the preprogrammed Favorite Contact
List key.
» Go to Menu > Contact > Favorite Contact.
» Press the preprogrammed Current Subgroup
Contact key.
» Press the Back/Subgroup key.
» Go to Menu > Subgroup.
2. Select the group contact.
3. Select the Call Type as Broadcast Call.
4. Press or the PTT key.
l To initiate a broadcast call through the keypad, do as
follows:
1. Go to Menu > Settings > Radio Set > Keypad
Mode, and then select Enable.
2. On the home screen, enter the group ID.
3. Press , , or the PTT key.
Keypad mode is enabled by your dealer. To input a
number complying with the dialling rules, consult
your dealer for more details.
l To initiate a broadcast call through the call log, do as
follows:
1. Enter the call log in one of the following ways:
» Go to Menu > Call Logs > Outgoing or
Incoming > Outgoing List or Incoming List.
» If is programmed as the Redial Call Log
key by your dealer, press on the home
screen.
» If is programmed as the BackDial Call
Log key by your dealer, press on the home
screen.
2. Select the group call log.
3. Select the Call Type as Broadcast Call.
4. Press or the PTT key.
Receiving a Broadcast Call
When receiving a broadcast call, the radio automatically
establishes the call. After the call is successfully
established , the radio displays .
You can listen to the broadcast call without any operation.
Ending a Broadcast Call
A broadcast call ends in any of the following cases:
l The call duration exceeds the preset time.
l The calling party ends the call.
14

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English