Hytera PD78XG User Manual

keypad, do as follows:
1. Go to Menu > Settings > Radio Set > Keypad
Mode, and then select One Touch Call/Menu.
2. Back to the home screen, press the
preprogrammed numeric key.
l To make other operations through the
preprogrammed key, press the preprogrammed One
Touch Call/Menu key.
Quick Dial
The Quick Dial feature allows you to enable or disable a
feature by entering the corresponding number on the
home screen.
With the keypad mode and the Quick Dial feature
enabled, you can enable or disable the features listed in
the following table.
Mode Features Operation
Conventional
You can adjust
power level, set
backlight, check
radio information,
mute the radio, and
enter the Manual
Switch menu.
On the home
screen, enter a
corresponding
number (0– 9),
and then press the
OK/Menu key.
Trunking
You can adjust
power level, set
backlight, check
radio information,
mute the radio,
enter the Manual
Switch menu,
check the control
On the home
screen, enter a
corresponding
number (0– 9),
and then press the
OK/Menu key.
Mode Features Operation
channel, disable the
Manual Switch
Preference feature.
You can switch BS,
control channel,
system code, or the
current group.
On the home
screen, enter
several numbers,
and then press the
OK/Menu key.
For the details on
numbers and
features, consult
your dealer.
With the keypad mode and the Quick Dial feature
enabled in conventional mode, you can enter "0" on
the home screen to open the Quick Dial input box.
To switch to the private ID input box, press . On
analog channel, only the Quick Dial input box is
available.
Scan
In conventional mode, the Scan feature allows you to
listen to activities on other channels, keeping track of
your team members. With this feature enabled, the radio
searches the scan list preset for the current channel and
stays on a channel with activities.
Enabling the Scan Feature
To enable the Scan feature, do one of the following:
l Go to Menu > Scan > Scan On/Off, and then select
On.
l Press the preprogrammed Scan key.
With the Scan feature enabled, the radio displays , and
the LED indicator slowly flashes orange. When activities
are detected on a channel, the radio stays on the channel,
and the LED indicator glows green. If the radio stays on a
non-priority channel, the radio displays . If the radio
stays on priority channel 1 or 2, the radio displays or
respectively.
If you do not want to listen to the activities on a channel,
press the preprogrammed Nuisance Temporary Delete
key to temporarily remove the channel from the scan list.
Setting the Scan List
The scan list contains at most 32 channels (including
analog and digital channels) for radio to scan.
To set the scan list, go to Menu > Scan > Scan List, select
the scan list, select Edit/View , and then do one of the
following:
l To add a channel to the scan list, select Add CH, and
then select the channel.
l To delete a channel from the scan list, select the
channel, and then select Delete CH.
l To set a channel with scanning priority, select the
channel, and then select Edit Prio CH > Set
PrioCH-1 or Set PrioCH-2.
22

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English