Hytera PD78XG User Manual

Receiving a Group Call
Conventional Mode
When receiving a group call, the radio displays .
You can listen to an incoming group call without any
operation.
Trunking Mode
When receiving a group call, the radio automatically
establishes the call. After the call is successfully
established, the radio displays .
You can listen to the call without any operation.
Ending a Group Call
In conventional and trunking mode, a group call
automatically ends when the call hang time expires.
In trunking mode, a group call also ends in any of the
following cases:
l The calling party ends the call.
l The call duration exceeds the preset time.
l The BS signal is lost.
l The calling party selects an empty group with the
Group Selector knob.
l A preemptive or emergency call interrupts the call.
In trunking mode, the radio user of the PD78X
enhanced version cannot end the call by selecting an
empty group.
Private Call
A private call is a call from an individual user to another
individual user.
Initiating a Private Call
When you initiate a private call, the radio displays .
Conventional Mode
l To initiate a private call to the private contact preset
for the current channel, press and hold the PTT key.
l To initiate a private call through the contact list, do as
follows:
1. Press the preprogrammed Contact List or
Favorite Contact List key, or go to Menu >
Contact > Contact List or Favorite Contact.
2. Select the private contact.
3. Press and hold the PTT key.
l To initiate a private call through the call log, do as
follows:
1. Go to Menu > Call Logs > Outgoing, Incoming,
or Missed > Outgoing List, Incoming List, or
Missed List.
2. Select the private contact.
3. Press and hold the PTT key.
l To initiate a private call through the keypad, do as
follows:
1. Go to Menu > Contact > Manual Dial, or go to
Menu > Settings > Radio Set > Keypad Mode
and then select Enable.
2. Press to switch the input mode to Private
ID.
3. Enter the private ID.
4. Press and hold the PTT key.
Trunking Mode
l To initiate a private call to the standby private
contact, press and hold the PTT key.
l To initiate a private call through the contact list, do as
follow:
1. Press the preprogrammed Contact List or
Favorite Contact List key, or go to Menu >
Contact > Private Contact or Favorite
Contact.
2. Select the private contact.
3. Press or the PTT key.
l To initiate a private call through the call log, do as
follows:
1. Enter the call log in one of the following ways:
» Go to Menu > Call Logs > Outgoing ,
Incoming , or Missed > Outgoing List ,
Incoming List, or Missed List.
» If is programmed as the Redial Call Log
key by your dealer, press on the home
screen.
» If is programmed as the BackDial Call
Log key by your dealer, press on the home
screen.
2. Select the private contact.
3. Press or the PTT key.
l To initiate a group call through the keypad, do as
follows:
12

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English