Hytera PDC760 - 3.1.11 Call Forwarding (Trunking Only); 3.1.12 Call Queuing; 3.1.13 Call on Analog Channel; 3.1.14 TOT

Configuration Guide
Feature Configuration
37
2. Conventional -> General Settings -> Basic -> Beacon Interval -> Beacon Interval
Note
This value is subject to the Beacon Interval setting of the repeater. Roaming application in IP
network will be affected by this parameter, thus, please contact Hytera for configuration guide if in
need.
3. Conventional -> Service -> Roaming -> Add
4. Conventional -> Zone and Channel -> Digital Channel -> Basic -> RX Frequency, TX Frequency