10
Procedures
1. Connect the power adapter to an AC source socket. See arrows .①
2. Place the terminal with the battery attached into the charger. See arrow ②. Make
sure the battery’s charging pieces are in good contact with the charger’s terminals.
3. The charging process begins when the charger LED solidly glows red.
4. When charging is complete, green LED glows. Then remove the battery or the
terminal from the charger.
The standard 1800mAh Li-Ion battery may take 3 hours for an ordinary charge. But before
initial use, please charge it for 5 hours to achieve optimal battery performance.
LED Indications and Charging Progress
LED Indicator Status
LED flashes red slowly. Standby (no load)
LED solidly glows red. Charging
LED solidly glows orange. Charging (above 85%)
LED solidly glows green. Fully charged
To Next Page
Loading...
