Hytera RD62 series - 4 Status Indication

8
4. Status Indication
The LED indicators on the front panel indicate the following repeating status:
LED Indicator Name LED Indication Repeater Status
Digital Mode LED Indicator Blue The repeater is operating in digital mode.
Analog Mode LED Indicator Yellow The repeater is operating in analog mode.
Slot A TX LED Indicator Red
 Analog mode: The repeater is transmitting.
 Digital mode: The repeater is transmitting in
Slot A.
Slot A RX LED Indicator Green
 Analog mode: The repeater is receiving.
 Digital mode: The repeater is receiving in
Slot A.
Slot B TX LED Indicator Red
Digital mode: The repeater is transmitting in
Slot B.
Slot B RX LED Indicator Green
Digital Mode: The repeater is receiving in Slot
B.
Alarm LED Indicator Red
Alarm occurs. The alarm LED indicator will
remain red until all alarms are eliminated.