7. Care and Cleaning
To guarantee optimal performance as well as a long service life of the product, please follow the tips
below.
Product Care
Keep the product in good environmental conditions to ensure reliability.
Do not place other equipment on top of the product to ensure optimal heat dissipation.
Do not pierce or scrape the product.
Keep the product far away from substances that can corrode the circuit.
Do not place the product in corrosive agents, solutions or water.
Product Cleaning
Caution: Be sure to turn off the product before cleaning.
Remove the dust and fine particles on the product surface with a clean and dry lint-free cloth or a
brush regularly.
Use a non-woven fabric with neutral cleanser to clean the connectors. Do not use chemical
preparations such as stain removers, alcohol, sprays or oil preparations. Make sure the product is
completely dry before use.
To Next Page
Loading...
