7
Duplexer with Front Side Facing Downwards
After-installation Verification
After installation is completed, power it on and verify whether it works properly by observing the 8 LEDs
located in the front panel.
Status Indication
LCD Icon
These icons may appear on the LCD to help you easily identify the repeater status.
Icon Name Icon Repeater Status
RSSI Indicator *
More bars indicate better signal strength.
TX Power Indicator
Low TX power for the current channel.
High TX power for the current channel.
Scan Indicator Scan is in progress.
Monitor Indicator *
The Monitor feature is active.
Speaker Indicator The speaker is unmuted.
RF Cable
Screw Screw
To Next Page
Loading...
