8
Alarm Indicator An alarm message is given.
Accessory Indicator *
An accessory is connected.
Scrambler/Encrypt
Indicator
The Scrambler/Encrypt feature is active.
Operation Mode
Indicator
RM The repeater is operating in Repeat mode.
LED Indicator
LED Indication Part No. Repeater Status
Power Indicator glows green. 2 Normal power-on
Alarm Indicator glows red. 10 Abnormal operation
Repeat Mode Indicator
glows green.
3 The repeater is operating in Repeat mode.
Repeat Mode Indicator
goes out.
3 The repeater is operating in Base mode.
Slot 1 TX Indicator glows
red.
8
The repeater is transmitting on an analog
channel or on slot 1.
Slot 1 RX Indicator glows
green.
9
The repeater is receiving on an analog
channel or on slot 1.
Slot 2 TX Indicator glows red. 6 The repeater is transmitting on slot 2.
Slot 2 RX Indicator glows
green.
5 The repeater is receiving on slot 2.
Analog Mode Indicator
glows yellow.
4 The repeater is operating in Analog mode.
Digital Mode Indicator glows
blue.
7 The repeater is operating in Digital mode.
Basic Operations
Turning the Repeater On/Off
ON: To power up the repeater, connect a DC power supply to it. In this case, the repeater shows
To Next Page
Loading...
