9
Care and Cleaning
To guarantee optimal performance as well as a long
service life of the product, please follow the tips below.
Product Care
Keep the product at a place of good ventilation and
heat dissipation to facilitate normal work.
Do not place irrelevant articles on top of the product
to ensure optimal heat dissipation.
Do not pierce or scrape the product with any edged
instruments or hard objects.
Keep the product far away from substances that can
corrode the circuit.
Do not place the product in corrosive agents,
solutions or water.
Product Cleaning
Caution: Disconnect the power supply from
the repeater before cleaning.
Remove the dust and ne particles on the repeater
surface with a clean and dry lint-free cloth or a brush
regularly.
Use a non-woven cloth with neutral cleanser to clean
the keys, control knobs, LCD and jacks after long-
time use. Never use chemical preparations such as
stain removers, alcohol, sprays or oil preparations.
Make sure the product is completely dry before use.
To Next Page
Loading...
