C
catherinemcintyreAug 9, 2025
Why group members cannot talk to each other via Hytera Repeater?
- MMartha IbarraAug 9, 2025
If group members can't communicate or the Hytera Repeater won't communicate with a subscriber radio, the issue could be due to several reasons. First, the TX/RX frequency of the repeater might not match that of the portable/mobile terminals; if so, try resetting the frequencies. Second, strong interference could be preventing signal repeating; if removing the interference source isn't possible, try operating on different frequencies. Finally, a group member might be outside the repeater's coverage area; in that case, move within the coverage area.