Hytera DMR System Planner
131
To connect PIN3 of digital repeater 1 and PIN16 of digital repeater 2.
To connect PIN16 of digital repeater 1 and PIN3 of digital repeater 2.
3) Digital audio output
To connect PIN24 or PIN25 of digital repeater 1 and PIN7 of digital repeater 2.
To connect PIN7 of digital repeater 1 and PIN24 or PIN25 of digital repeater 2.
The back-to-back function can realize cross-band communication among analog
and digital repeaters. Working with IP Multi-site Connect, it still enables you to enjoy
remote communication services.
Communication among Analog-Analog Repeaters
Figure 4.2.1.1-4: Communication among Analog-Analog Repeaters 1
To Next Page
Loading...
