(Optional) To enable data roaming, tap following Data roaming.
4.3.2 WLAN
You can connect the product to the WLAN to access the server, make calls, and send and receive messages.
To use the WLAN, do the following:
Open Settings.
Swipe down from the status bar, and then tap .
On the home screen, tap .
Go to Network & connection > WLAN.
Tap following WLAN.
The available WLAN networks will be displayed.
Tap a network.
The product will automatically connect to the network.
(Optional) If the network displays with a icon, enter the password, and then tap CONNECT.
The product automatically saves the WLAN information upon successful connection, and automatically reconnects when
WLAN is switched on.
4.4 Adjust the Volume
Swipe down from the status bar, tap the volume bar or drag the slider.
See
5 System Settings.
To Next Page
Loading...
