LED Indicator
LED Indication Terminal Status
LED glows red. Transmitting a call
LED glows green. Receiving a call
LED ashes red slowly. Low battery
LED ashes green slowly. DMO mode channel free
LED glows orange. DMO mode channel busy
Basic Operations
Turning the Terminal On/Off
To turn the terminal on, rotate the Power On-Off/Volume Control
knob clockwise until a click is heard.
To turn the terminal off, rotate the knob counter-clockwise until a
click is heard.
Adjusting the Volume
In the home screen, rotate the Power On-Off/Volume Control
knob clockwise to increase the call volume, or counter-clockwise
to decrease it.
To adjust the alert tone volume, go to “Func -> Proles ->Normal”.
Selecting a Talk Group
In the home screen, rotate the Talkgroup Selector knob to
switch to select your desired talk group ( appears on the
Status Indication
display). Meanwhile, name of the talk group appears on the
screen.
You can also set a talk group as the default group by going to
“Options->Talk Group->Selected List”. See Selected List on page
15 for more details.
Locking/Unlocking the Keypad
To lock or unlock the keypad, press OK and then . When
the keypad is locked, you can also answer and reply to calls.
After a call is completed, the keypad will return to be locked.
Switching Operation Mode
Go to “Options -> TMO/DMO” to select your desired mode.
Basic Operations
To Next Page
Loading...
