Call
Individual Call
Transmitting an Individual Call
Operations in DMO mode:
Input the number you want to call through the keypad, or go
to “Func -> PhoneBook” to select the contact you want to
call.
Then hold down the PTT and speak into the microphone, to
transmit a simplex call.
Operations in TMO mode:
Through the menu
Go to “Func -> PhoneBook” to select the contact you want to
call.
Hold down the PTT to transmit a simplex call, or press
to transmit a duplex call.
Through manual input
Input the number you want to call through the keypad.
Set Ctype to Private No (it will appear on the screen).
Hold down the PTT to transmit a simplex call, or press
to transmit a duplex call.
Note:Entryofprivatenumbermustcomplywith
the SSI&TSIdialingrules.SeeAppendix
2SSI&TSIDialingRulesonpage XXXfor
moredetails.
Receiving and Responding to an Individual Call
Operations in DMO mode:
When the PTT is released, the terminal is always ready to receive
1.
2.
●
1.
2.
●
1.
2.
3.
calls. When the other party stops talking, you can hold down
the PTT and speak into the microphone to call back.
Operations in TMO mode:
Simplex Call
When a simplex call is received, you can receive without any
operation. When the other party stops talking, you can hold
down the PTT and speak into the microphone to call back.
Duplex Call
When a duplex call is received, you can press to
receive. And then both parties can speak simultaneously
without any key operation.
Group Call
Group call is a simplex call initiated by a single user to all users
in a talk group. Available talk groups are preset by your dealer.
DMO mode supports up to 1024 talk groups, and TMO mode
supports up to 2048 talk groups. Both modes support group call,
and operations are the same.
Transmitting a Group Call
In the home screen, rotate the Talkgroup Selector knob
to switch to your desired talk group ( appears on the
display).
Press OK to conrm your selection.
Hold down the PTT to initiate the call.
●
●
1.
2.
3.
To Next Page
Loading...
