FCC Regulations
Federal Communication Commission (FCC) requires that all radio
communication products should meet the requirements set forth in
the above standards before they can be marketed in the U.S, and
the manufacturer shall post a RF label on the product to inform
users of operational instructions, so as to enhance their occupational
health against exposure to RF energy.
Operational Instructions and Training
Guidelines
To e nsur e opt i m a l p e r form a n c e a n d c o m p l ian c e wi t h th e
occupational/controlled environment RF energy exposure limits in
the above standards and guidelines, users should transmit no more
than 50% of the time and always adhere to the following procedures:
Yo u r p r o d u c t r a d i a t e s m e a s u r a b l e R F e n e r g y
o n l y w h i l e i t i s t r a n s m i t t i n g ( d u r i n g t a l k i n g ) ,
not when it is receiving (listening) or in standby mode.
Keep the product at least 2.5 centimeters away from your body
during transmission.
EU Regulatory Conformance
As certied by the qualied laboratory, the product is in compliance
with the essential requirements and other relevant provisions of
the Directive 1999/5/EC. Please note that the above information is
applicable to EU countries only.
1.
2.
To Next Page
Loading...
