Hytera X1p - Page 31

30
may be inconsistent with
that of other members.
the same as that of other members.
The channel type
(digital/analog) may be set
inconsistently.
Make sure all members are on the same
digital/analog channel.
communicate with
other members.
You may be too far away
from the group members.
Move towards other members.
You may be interrupted by
products using the same
frequency.
Change the frequency, or adjust the squelch
level.
Irrelevant
communication or
noise is heard on the
channel.
The product may be set with
no signaling.
Set signaling for all member products to
avoid interference at the same frequency.
You may be too far away
from other members.
Move towards other members.
You may be at an
unfavorable position. For
example, your
communication may be
blocked by high buildings or
frustrated in the
underground areas.
Move to an open and flat area, and restart
the product.
The noise is too loud.
You may suffer from
external disturbance (such
as electromagnetic
interference).
Stay away from equipment that may cause
interference.
The GPS cannot locate
your position.
No GPS signal is received.
Move to an open and flat area, and restart
the product.
The battery power for the
Bluetooth may run low.
Charge the Bluetooth.
The Bluetooth cannot
be paired.
The Bluetooth may be too Move the Bluetooth towards the product.