Hytorc LITHIUM II Series - Tool Handling and Battery Pack Safety

L – LITHIUM SERIES II Tool Procedures
See LITHIUM SERIES Operations Guide for more detailed instructions regarding menu
 L1 General Handling & Usage
 L2 Test, Charge & Install Battery
 L3 Install Reaction Arm (Conventional)
 L4 Install Socket (Conventional)
 L5 Install HYTORC Washer Driver
 L6 Install HYTORC Nut Driver
 L7 Install Side Handle
 L8 Actuate Control Switches
 L9 Home Screen/Menu System
 L10 Initialize Basic Bolting
 L11 Advanced Bolting Features
 L12 Jobs
 L13 Profiles
 L14 Settings
 L15 Admin Menu