Hytorc LITHIUM II Series - Battery Charger Safety and Emissions

General Handling & Usage
Inspect Tool and Calibration
 Check the certificate or label on the tool for the most recent calibration date
 HYTORC recommends all tools be tested and recalibrated periodically. More frequent
calibration may be appropriate depending on local practice, usage and conditions.
 Customer/user is responsible for arranging testing and recalibration
 Contact 800-FOR-HYTORC for assistance or further information
 When not in use, store all tool components in the plastic storage case
 Save all instructions and calibration reports in the storage case
L1
Check Calibration Date
Store Tool and instructions in case