4
Snug
1. 预拧扭矩
2. 着座
3. Fuegen
4. Stretto
5. Ajustement serré
6. Ajustado
Torque
1. 扭矩
2. トルク
3. Drehmoment
4. Coppia
5. Couple
6. Torque
Enables the Torque function, allowing
the user to adjust the torque value up and
down as required for bolting applications.
Enables the Snug function, allowing users
to set a torque value at the lower end of
the tool's capability in order to bring two
structural surfaces into contact.
Angle
1. 角度
2. 角度
3. Winkel
4. Angolo
5. Angle
6. Ángulo
Enables the Angle function, allowing
users to adjust the angle as part of
“Torque and Angle” sequence within the
same trigger event as the Torque.
Release
1. 发布
2. 開放
3. Freidrehwinkel
4. Rilascio
5. Déblocage
6. Liberación
Release adjusts the tool release angle to
take the tension off the motor following a
torque operation, allowing the tool to be
released from the application.
Fastener
1. 紧固件
2. ファスナー
3. Verbindungselement
4. Fissaggi di serraggio
5. Fixation
6. Sujetador
Fastener allows the selection of fastener
type: Right Hand Nut, Left Hand Nut,
HYTORC Washer Right Hand, HYTORC
Washer Left Hand and HYTORC Nut.
ICON MEANING DESCRIPTION
. MAIN MENU
To Next Page
Loading...
