Hytorc LITHIUM Series User Manual

LITHIUM SERIES® II ELECTRIC TORQUE TOOL USER INTERFACE GUIDE

A Profile ID can be entered directly via the tool’s 3-button user interface.
Select Jobs > Profiles > Create Profile and enter the desired profile name with the left and right button. Press the center
button again to end and save the Profile ID.
Select a Profile Type and enter the appropriate values for that profile. The profile parameters for a Torque profile named
PROFILE1 are shown being entered and accepted below.
CREATE PROFILE ON THE TOOL
(CONT’D.)(CONT’D.)

Hytorc LITHIUM Series Specifications

General

Brand	Hytorc
Model	LITHIUM Series
Category	Tools
Language	English