Need help?Do you have a question about the Hytorc LITHIUM Series and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 18V |
| Speed | Varies by model |
| Series | LITHIUM |
| Type | Hydraulic Torque Wrench |
| Accuracy | +/- 3% |
Describes the LCD screen, status indicator, buttons, and ports on the control panel.
Instructions for turning the electric torque tool on and off.
Details major functions, values, units, and indicators on the Home Screen.
Guides on accessing and scrolling through the main menu and sub-menus.
How to set and adjust the torque value for bolting operations.
Using the Snug function for alignment and initial tightening.
Adjusting the angle for Torque & Angle operations.
Using the Release function to reduce motor tension.
Selecting fastener types and their impact on rotation.
Steps for adjusting parameters, rundown, positioning, and reaction arms.
Procedures for tightening with torque and loosening bolts.
Definitions, impacts, and actions for common error messages.
To Next Page
