Hytorc LITHIUM Series User Manual


NOTE: If no Profile ID has been selected, all bolting data is assigned the Profile ID "CWP" (Current Working Profile) by default.
CSV EXAMPLES
CSV LINE FORMAT EXAMPLES PARAMETERS
TORQ_, TAR, , , , RH
PID = TORQ_500, PTYPE = TAR, Torque = 500 ft-lbs, Angle = 30 deg,
Release = 7 deg, Fastener = Right Hand
SNUG_, SRF, , , , HWR
PID = SNUG_075, PTYPE = SRF, Snug = 75 ft-lbs, Angle = 0, Release = 0,
Fastener = HYTORC Washer Right Hand
ANGL_, RAR, , , RH, NORMAL
PID = ANGL_120, PTYPE = RAR, Turn Angle = 120 deg, Release = 5 deg,
Fastener = Right Hand, Speed = Normal
CHEK_, TCK, , , HWR
PID = CHEK_500, PTYPE = TCK, Torque Check = 450 ft-lbs, Release = 5 deg,
Faster = HYTORC Washer Right Hand
ROTAT_, ROT, , , RH, 
PID = ROTAT_10, ROT, Release = 7 deg, Torque Limit = 100 ft-lbs, Fastener =
Right Hand, Rotations = 10
This option allows the user to select from a list of available profiles and install the parameters saved in that profile.
The Profile ID (PID) is displayed in alternating intervals in the same positon as the JID.
SELECT PROFILE
(CONT’D.)(CONT’D.)

Hytorc LITHIUM Series Specifications

General

Brand	Hytorc
Model	LITHIUM Series
Category	Tools
Language	English