Hytorc LITHIUM Series User Manual

LITHIUM SERIES® II ELECTRIC TORQUE TOOL USER INTERFACE GUIDE

The tool will automatically shut down after 5 minutes of
inactivity. When Auto Showdown is set to O, the tool will
stay on continuously until the battery is drained.
The Worklight is set by default to come on when the trigger
is pulled and turn o 5 seconds after release. Select "O" to
deactivate the Worklight.
When enabled, can be used to sync the tool with HYTORC
bolting software.
This option allows the user to adjust button response
time from 75 to 500 ms. A higher delay value slows menu
scrolling and selection.
AUTO SHUTDOWN
WORKLIGHT APP MODE
BUTTON DELAY
(CONT’D.)(CONT’D.)

Hytorc LITHIUM Series Specifications

General

Brand	Hytorc
Model	LITHIUM Series
Category	Tools
Language	English