ENG- usermanual MXT-XLT.docx Version 2.5 / Jan-16 3
1. WELKOM AT HYTORC
Thank you for buying HYTORC equipment.
This user manual and safety instructions is designed to provide you with the basic knowledge
required to operate and maintain your new HYTORC equipment.
Please read this manual carefully and follow the instructions provided. If you still have any
questions regarding HYTORC bolting equipment, please do not hesitate and call us at
+31 (0) 24 3660 660 or contact us at info@hytorc.nl.
You also find more information on our website www.hytorc.nl
2. GENERAL INFORMATION
Your purchase of HYTORC equipment entitles you to the following HYTORC services:
Instructions to your employees within your organization by a HYTORC specialist
Free annual inspection of your HYTORC equipment
24-hour service
When you need help abroad? No problem! We help you!
HYTORC equipment according to the newest technology
A full year complete warranty
In case of failure under warranty of standard tools, substitutional rental equipment can be
supplied at request
Qualified work force employable for solutions at difficult challenges
3. SAFETY INSTRUCTIONS
Warning: Your HYTORC torque machine is a power tool, and as with any power tool, certain
safety precautions should be observed to avoid accidents or personal injury. The following
instructions will assist you.
Read all instructions.
Keep work area clean and well lit.
Consider work area environment. Electrical Pumps should never be used in an
atmosphere that can be considered potentially volatile. If there is any doubt, use an air
pump. Note: Metal-to-metal contact can cause sparks, precautions should be taken.
Avoid premature tool starting. The Pump Remote Control is for the TOOL OPERATOR
only.
Stay clear during operation. In most cases, the tool will allow “hands free” operation. If
the tool must be held or steadied during operation, use alternative means of securing the
tool to the application.
To Next Page
Loading...
