Hytorc MXT-7 - Page 5

FOR MORE INFORMATION
HYTORC Nederland BV | Platinawerf 8 - 6641 TL Beuningen - NEDERLAND | Tel: +31(0)24 - 3 660 660 | www.hytorc.nl
HYTORC Benelux BVBA | Ysselaarlaan 65B - 2630 Aartselaar - BELGIË | Tel : +32(0)38 - 705 220 | www.hytorc-benelux.be
ENG- usermanual MXT-XLT.docx Version 2.5 / Jan-16 5
 Stay away of the reaction points. Remain clear of the reaction arm during operation and
never punt body parts between reaction arm and reaction
surfaces.
 Always use quality accessories. Always use top quality impact sockets in good condition
that are the correct size and fully engage the nut. Hidden flaws, however, remain a
possibility that could cause breakage, so stay clear of sockets during operation.
 Do not use other equipment to enhance performance. For example a hammer on the
socket or tool.
Comment:
HYTORC pumps are designed to operate HYTORC tools only and otherwise. Damage may
occur to the pump or the product that is being operated due to misuse.
You can find a version of the instructions on the reverse side of the torque charts.
STORE THESE SAFETY INSTRUCTIONS WITH YOUR HYTORC TOOL!