What to do if my Hytorc Power Tool ratchet does not take successive strokes?
If the ratchet does not take successive strokes, the square drive or the ratchet spring may be defective, requiring replacement. Also, ensure the piston fully retracts. Another possible cause is damage to the linkage between the piston rod and the drive plates, which would also require replacing the defective part.
Why does my Hytorc Power Tool lock onto the nut?
If the tool locks onto the nut, it is likely that the square drive is loaded at full torque. Use the disengagement lever to remove the tool from the nut or bolt.
Why does ice build up at the exhaust of my Hytorc Stealth 14?
If ice builds up at the exhaust, the ambient temperature is likely too low. Wait 5-10 minutes to let the ice melt.
Covers fundamental safety guidelines for personnel, work area, and equipment.
Provides further safety precautions for specific equipment components.
Safety guidelines for electric and pneumatic pump units.
Safety instructions for handling and connecting hydraulic hoses.
Safety guidelines specific to the use and handling of reaction arms.
Safety precautions for selecting and using appropriate sockets.
Focuses on the main tool, its parts, and functions.
Covers the specifications and connection of hydraulic hoses.
Provides step-by-step instructions for connecting hydraulic hoses securely.
Outlines the procedure for safely disconnecting hydraulic hoses.
Details the requirements and procedures for connecting power to electric pump units.
Describes the setup and requirements for air supply to pneumatic pump units.
Covers measures to make the system explosion-proof for hazardous areas.
Lists essential checks to perform before operating the equipment.
Explains how to use the button to release tension and remove the tool.
Covers torque settings and related information for the tool.
Provides a chart relating pressure settings to torque output.
Details the procedure for setting the desired torque on the pump unit.
Guides the user through the process of tightening flange connections.
Step-by-step instructions for loosening bolted flange connections.
Lists routine maintenance tasks to ensure proper functioning and longevity.
General| Brand | Hytorc |
|---|---|
| Model | Stealth 14 |
| Category | Power Tool |
| Language | English |
To Next Page