7
Leading Innovation in Torque and Tension Since 1968
The World’s Most Trusted Industrial Bolting Systems
• HOSES
Do not kink hoses. Inspect and replace if damaged.
• SHROUDS AND COVER PLATES
All tools are equipped with shrouds and/or cover plates to cover up moving internal parts. If shrouds are
missing or damaged, please contact your local HYTORC representative for repair. A free loaner tool will
be made available to you during the time of repair.
• MAINTAIN TOOLS WITH CARE
For top performance, inspect tool powerpack, hoses, connectors, electric lines, and accessories for visual
damage frequently. Always follow instructions for proper tool and pump maintenance. Refer to the
Operations Maintenance Section for further clarication.
• STAY ALERT
Watch what you are doing. Use common sense. Do not use power equipment under the inuence of any
mood altering substances.
• PRIOR TO OPERATION
Ensure that all hydraulic connections are securely connected. Verify that the hydraulic hoses are not
kinked. Ensure the square drive and its retainer are fully and securely engaged.
• PRIOR TO USE
Cycle tool to ensure proper function. Locate a solid, secure reaction point. Be sure the reaction arm retain-
ing clamp is fully engaged. Be sure the hydraulic hoses are free and clear of the reaction point. Pressurize
the system momentarily; if the tool tends to “ride up” or to “creep”, stop and re-adjust the reaction arm to a
more solid and secure position.
NOTE: For additional safety, a HYTORC Washer can be used in place of the reaction arm; call your
HYTORC representative for more information.
• ALWAYS USE QUALITY ACCESSORIES
Always use top quality impact sockets in good condition which are the correct size and fully engage the
nut. Hidden aws, however, remain a possibility which could cause breakage, so stay clear of sockets
during operation.
• DO NOT USE FORCE
Do not hammer on the socket or the tool to enhance performance. If the nut will not turn with the wrench
you are using, use a larger size HYTORC tool.
• REACTION ARM
Proper reaction is required. Adjust reaction arm or plate accordingly. Avoid excessive play. In case of
questions, consult with your local HYTORC ofce.
To Next Page
Loading...
Need help?
General
