6
Leading Innovation in Torque and Tension Since 1968
The World’s Most Trusted Industrial Bolting Systems
SECTION I
IMPORTANT
SAFETY
INSTRUCTIONS
WARNING: Your HYTORC TORQUE/TENSION MACHINE is a power tool, and as with any
power tool, certain safety precautions should be observed to avoid accidents or personal
injury. The following tips will assist you.
• READ ALL INSTRUCTIONS
• KEEP WORK AREA CLEAN AND WELL LIT
• CONSIDER WORK AREA ENVIRONMENT
Electrical Pumps should never be used in any atmosphere which can be considered potentially volatile.
If there is any doubt, use an air pump. Note: metal to metal contact can cause sparks, precautions
should be taken.
• AVOID PREMATURE TOOL STARTING
The Pump Remote Control is for the TOOL OPERATOR only. Avoid separate pump and tool operator.
• STAY CLEAR DURING OPERATION
In most cases, the tool will allow “hands free” operation. If the tool must be held or steadied during
operation, use alternative means of securing the tool to the application.
• GUARD AGAINST ELECTRIC SHOCK
Ensure the pump is properly grounded and the proper voltage is being used.
• STORE IDLE TOOLS
When not in use, tools and accessories should be properly stored to avoid deterioration.
• USE THE RIGHT TOOL
Don’t force small tools or attachments to do the job of a larger tool. Don’t use a tool for purposes not
intended. HYTORC can develop custom accessories for your job to ensure safe and simple operation.
Contact your local HYTORC representative for more information on our custom engineering abilities.
• PROPER SAFETY ATTIRE
When handling/operating hydraulic equipment, use work gloves, hard hats, safety shoes, hearing
protection, and other applicable clothing.
• USE SAFETY GLASSES
• MOVING EQUIPMENT
Do not use hydraulic hoses, uni-swivels, pump power or remote cords as means of moving the equipment.
To Next Page
Loading...
Need help?
General
