Need help?Do you have a question about the Hyundai HiRun N50-015SF and is the answer not in the manual?
Step-by-step guide on how to set the maximum output frequency.
Instructions for starting and controlling motor speed using the potentiometer.
Procedure for displaying and monitoring the inverter's output current.
Protects against excessive output current by halting inverter output.
Prevents motor overload by tripping the electronic thermal relay.
Cuts off output when DC link voltage exceeds specified limits.
Halts operation if communication errors occur due to noise or temperature.
Stops the inverter when input voltage drops below operational specifications.
Shuts off output if the inverter output is short-circuited.
Indicates an error if the power is turned on while the inverter is in RUN state.
Disables output if the inverter's EEPROM has an error.
Receives signals from external equipment to cut off output.
Halts output if the main circuit temperature rises due to cooling fan failure.
To Next Page
General