Hyundai N800 Series User Manual

Notice
R
ead and understand these manuals before attempting any un-
packing, assembly, operation or maintenance of the inverter
This manual should be applied only to N800A inverter.
This manual dose not include all items regarding installation and
maintenance procdures.
For more information, please contact authorized parteners.
N800-Series
N800A Inverter
Installation Manual

Hyundai N800 Series Specifications

General

Model	N800 Series
Category	Inverter
Frequency	50Hz/60Hz
Protection Features	Overload, Overvoltage, Short Circuit, Overheating
Cooling Method	Forced air cooling
Dimensions	Varies by model
Weight	Varies by model

Summary

Safety

Warnings and Cautions

Details critical safety warnings and cautions for handling the inverter safely.

Earthing and Earth Fault Protection

Specifies requirements for protective earthing and earth fault protection for the drive.

EMC and RCD/RCM Use

Covers EMC requirements and guidance on using RCD or RCM protective devices.

Mounting

Wall Mounting Dimensions

Specifies dimensions and mounting details for installing the AC drive on a wall.

Flange Mounting Dimensions

Cooling Requirements

Outlines necessary clearances and airflow for proper AC drive cooling.

Power Cabling

Cable Connections and Standards

Cable Dimensioning and Selection

Guidance on selecting and dimensioning power and control cables based on requirements.

Cable Installation Preparation

Cable Installation Steps

Detailed step-by-step instructions for performing the physical cable installation.

Commissioning and Additional Instructions

Commissioning Safety and Procedure

Safety precautions and step-by-step procedures for initial drive commissioning.

Motor Operation and Pre-Start Checks

Insulation Measurement

Technical Data

AC Drive Power Ratings

N800A General Technical Data

Comprehensive technical specifications including operating conditions and performance.