5
5-23
Door locks
Operating door locks from
outside the vehicle
Using the mechanical key
2C_UsingEmerengcyKey
2C_UsingEmerengcyKey_2
[A] Lock
[B] Unlock
To unlock:
1. Pull the door handle (1).
2. Press the release button (2) located
inside the cover with a mechanical key.
3. Carefully pull out the cover (3) while
continuing to press the release button
to remove the cover and expose the key
cylinder.
4.Insert the mechanical key into the key
cylinder and rotate (4) clockwise to
unlock the vehicle and
counterclockwise to lock the vehicle.
Once the doors are unlocked, they can be
opened by pulling the door handle.
Only the driver’s door can be
locked/unlocked using the mechanical
key.
• When removing the key cylinder cover,
avoid scratching or breaking the plastic
material.
• If the key cylinder cover freezes and
cannot be removed easily, lightly tap on
the cover or try to warm the cover by
placing your hands around it and
blowing warm air on it.
• Do not apply excessive force to the
door and door handle.
Removing ice from door handle
The inner part of the door handle may
freeze during cold winter. Tap the door
handle with the palm side of the fist to
remove the ice.
Follow the instructions below to remove
the ice from the door handle.
1. Tap around the door handle with the
palm side of your fist to remove the ice
inside the door handle.
2. Unlock the door and see if the door
handle slices out. If the handle does not
slice out, continue tapping around the
handle and remove more ice.
3. Hold the door handle, and open and
close the door multiple times to remove
the remaining ice.
0SX2HEV_en_GN.book Page 23