7
7-45
• If you change the Warning Methods,
the Warning Methods of other Driver
Assistance systems may change.
• If you turn off the haptic warning when
the warning volume is '0', the warning
volume will turn on and will be set to '2'.
• If you set the warning volume to '0'
when the haptic warning is off, the
haptic warning will turn on.
• If the vehicle is restarted, Warning
Methods will maintain the last setting.
Blind-Spot
Collision-Avoidance Assist
operation
Driving-Warning
2C_BCAVehicleDetection
• To warn the driver a vehicle is detected,
the warning light on the outside
rearview mirror will illuminate.
• Blind-Spot Collision Warning will
operate when your vehicle speed is
above 20 km/h (12 mph) and the speed
of the vehicle in the blind spot area is
above 10 km/h (7 mph).
• Collision warning will operate when the
turn signal is turned on in the direction
of the detected vehicle.
• To warn the driver of a collision, the
warning light on the outside rearview
mirror will blink. At the same time, an
audible warning will sound.
• When the turn signal is turned off, the
collision warning will be cancelled and
Blind-Spot Collision Avoidance Assist
will return to vehicle detection state.
0SX2HEV_en_GN.book Page 45
To Next Page
Loading...
Need help?
General
