7
7-43
• Rear bumper genuine parts with rear
corner radars have proven their
performance. Replacing or painting the
rear bumper may result in poor
performance of Blind-Spot Collision
Avoidance Assist. When the parts need
to be replaced or modified, make sure
to use qualified products.
• Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear corner
radar.
• Blind-Spot Collision Avoidance Assist
may not work properly if the bumper
has been replaced, or the surroundings
of the rear corner radar have been
damaged or paint has been applied.
• If a trailer, carrier, etc., is installed, it
may adversely affect the performance
of the rear corner radar or Blind-Spot
Collision Avoidance Assist may not
operate.
Blind-Spot
Collision-Avoidance Assist
settings
Blind-Spot Safety
2C_BlindSpotSafetySetInfo
With the vehicle on, select Settings >
Vehicle > Driver assistance > Driving
safety > Blind-spot safety from the
settings menu to set whether to use each
function.
• If “Blind-spot safety” is selected,
Blind-Spot Collision Avoidance Assist
will warn the driver with a warning
message, an audible warning
depending on the collision risk levels.
Braking assist will be applied for
parking exit depending on the collision
risk levels.
2C_BlindSpotSafetyOffInfo
When the vehicle is restarted with
Blind-Spot Collision-Avoidance Assist off,
the “Blind-spot safety system is Off”
message will appear on the instrument
cluster.
0SX2HEV_en_GN.book Page 43
To Next Page
Loading...
Need help?
General
